Informative

* GOALS * The goal of the tests was to quantify track times before and after adding our aerodynamic parts to the car. There are 2 different...

SUMMARY: OVERALL TESTING DATA ** The temperature data is taken from 4 consecutive laps around Putnam Park Road Course. We installed 4 thermocouples...

SUMMARY: OVERALL TESTING DATA ** DEVELOPMENT ** SENSOR LOCATIONS ** *All of these locations are separate thermocouples connected to an ...

*Records* ** Robin Jonasson sets new lap record of 1.21.199 for Gatebil Time Attack on Rudskogen in Norway BBi Lucy set record and 1st place in clas...

For those of you who have not heard, we have recently released a handful of products for the 10th Gen Civic Type R. In the following blog post, I wi...

If you are a subscriber to our YouTube channel, you may have seen our video that was released earlier today of Eric giving a quick walkaround o...

If you are a subscriber to our YouTube channel, you have likely seen some of our maintenance videos, whether that is for our Porsche 987 or our recent...

We recently put the Izze Ride Height Sensors to use on our shop Porsche 987.2, but have you ever wondered what laser ride height sensors are used fo...

Do you happen to know the difference between the Subaru chassis codes GR and GV? If not, we don't blame you as these chassis codes can become quite ...

As some of you may have seen, our Dual-Element Rear Wing was recently put to the test by BBi Autosport during Pikes Peak International Hill Climb. ...

ProjectFT86SFTA has finally come to an end for this season for Verus, as the car left us to have some finishing touches done before it hits the trac...

With the success of our Billet Clutch Fork for the VA WRX and various other Subaru models, we decided to take the development process one step further...

Have you fallen behind on our ProjectFT86SFTA series? If so, it's time to get caught up with what we have had going on in the shop for the past coup...

On this week's episode of ProjectFT86SFTA, Eric discusses what has been going on with cooling system upgrades for the build, and demonstrates his wo...

In this week's episode of ProjectFT86SFTA, Eric gives you an up-close look on how scanning actually works and explains where we currently are at wit...

As many of you may know, we recently took on a one-off aero package for the FT86Speedfactory Time Attack car. ProjectFT86SFTA is something that we h...

With the continued success of our BRZ/FRS/GT86 Air Oil Separator (AOS), we decided to bring this same idea to the ND market. The oil that makes ...

Designing products is what we do repeatedly at Verus Engineering; but, we have never really spoken about what goes into producing a new part, from sta...

With the advent of scanning, reverse engineering for engineers got significantly better and easier. This leap forward in technology allows us, as de...

R&D, also known as research and development; is the work a business performs to innovate, introduce, or improve a product.  In our business, R&D is on...