UCW Rear Wing Kit - Subaru STI (VA) (BLEMISH)
OVERVIEW
*The pictures provided above are not the blemished product. Blemish products have small defects on the surface finish or carbon but are structurally sound.*
The UCW rear wing is a great addition to your VA STI to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. The trunk mounts are beautifully sculpted pieces from 6061-T6 aluminum that bolt on like factory with hidden hardware for the uprights.
Verus Engineering developed the UCW rear wing to bridge the gap between our swan neck high-efficiency rear wing and our 300mm V1X airfoil. With the 250mm curved chord, the UCW makes more downforce than the high-efficiency rear wing and significantly more downforce than similarly sized competitor wings.
Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X. Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed and performs well.
During the design process; we utilized in-house scan data. This results in a product that features a near OEM fit and finish.
The UCW wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package.
WHAT IS INCLUDED
Rear Wing Element Assembly
Rear Wing Upright, Machined Aluminum (2)
Rear Wing Trunk Mount, Machined Aluminum (2)
Rear Wing Endplate (2)
Hardware Kit, Includes All Parts Necessary for a Seamless Install
Includes Drill Template
Includes Trunk Load Transfer Hardware
Includes Trunk Double-Sided Tape
PART NUMBER
A0235A-CRB-BLEM
A0235A-BLEM
INSTALL AND DATA
INFORMATIVE PACKET
INSTALL MANUAL
FEATURES
Optimized Airfoil Using ANSYS Adjoint Solver
Improved Efficiency (L/D)
Increased Downforce
Bolts to OEM Trunk
Capable of Generating and Withstanding 500+lbs of Downforce
Capable of Balancing Out Significant Front Aerodynamic Systems
SPECIFICATIONS
Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
Machined Billet Aluminum Uprights
Machined Billet Aluminum Trunk Mounts
Load Transferring Trunk System
Stainless Hardware Throughout
SCIENCE
The Verus Engineering UCW Rear Wing was specifically designed for the VA WRX enthusiast who wants more rear-end downforce than what our high-efficiency rear wing generates. The wing has the capability of operating and generating downforce from 0 to 15 degrees angle of attack. As part of our Ventus 3 aerodynamic kit, the rear wing, and aero kit adds a significant amount of downforce to the car to help reduce lap times and increase corner speed.
Our CFD data and our real-world experimental data match up quite well. The wing hit all the major goals we set forth to achieve first in our CFD simulations and then with our real-world testing. The strong correlation between CFD data and real-world testing validates both our CFD analysis approach and the wing’s performance.