OVERVIEW
Looking to add some radical and purposeful styling to your V1X Rear Wing? Elevate your wing's style with the new KMX V1X Carbon Fiber Endplate kit. The units bolt on exactly how our standard endplates bolt on, with no change in hardware. The units are produced from 2x2 twill pre-preg carbon on machined aluminum molds for a consistent fit and finish. The units are finished with a gloss automotive clear for UV resistance.
These were designed and developed using CFD to improve the performance and aesthetics of the V1X Rear Wing Element. By venting the top side of the wing in a specific way and shaping the bottom portion of the endplate, we were able to reduce drag and increase downforce. This resulted in an improvement in wing efficiency of 0.6% (also know as Lift Over Drag or L/D) over the traditional V1X Endplates at 10 degrees AOA. Testing was conducted using a swan neck upright and mount style in free stream airflow.
The endplates bolt directly to any V1X rear wing, regardless of chassis!
WHAT IS INCLUDED
- (1) KMX V1X Carbon Fiber Endplate, Left-Hand
- (1) KMX V1X Carbon Fiber Endplate, Right-Hand
PART NUMBER
W-A0012
Features:
- Improved Rear Wing Performance (L/D improvement of 0.6%)
- Aesthetically Tasteful Vents, Shape, and Expanding 3D Contour
- Increased Downforce (1%)
- Reduced Drag (5%)
- Developed using CFD with Wing in Free Stream Airflow for improved performance
Features:
- Improved Rear Wing Performance (L/D improvement of .6%)
- Aesthetically Tasteful Vents, Shape, and Expanding 3D Contour
- Increased Downforce (1%)
- Reduced Drag (5%)
- Developed using CFD with Wing in Free Stream Airflow for improved performance
Specifications:
- Carbon Fiber Endplate - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
- Bolts Directly to *All* V1X Wing Elements
Specifications:
- Carbon Fiber Endplate - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
- Bolts Directly to *All* V1X Wing Elements
Science:
The Verus Engineering V1X Rear Wing was specifically designed for the avid driving enthusiast looking for a higher downforce wing more geared towards road course and track applications. To further enhance performance and aesthetics, we set out to develop endplates to push the envelope further. By reducing the vortices that the endplate and wing produce, along with shedding some of the high-pressure air on the top side of the wing, we were able to improve the wings' L/D (efficiency) by over 0.6%.
Science:
The Verus Engineering V1X Rear Wing was specifically designed for the avid driving enthusiast looking for a higher downforce wing more geared towards road course and track applications. To further enhance performance and aesthetics, we set out to develop endplates to push the envelope further. By reducing the vortices that the endplate and wing produce, along with shedding some of the high-pressure air on the top side of the wing, we were able to improve the wings' L/D (efficiency) by 0.6%.
Behind the Scenes Look:
Despite wanting to add a bit aesthetic flair to our V1X our new KMX Endplates serve as a performance upgrade as well!
For additional assistance and information, be sure to e-mail us at [email protected].
Behind the Scenes Look:
Despite wanting to add a bit aesthetic flair to our V1X our new KMX Endplates serve as a performance upgrade as well!
For additional assistance and information, be sure to e-mail us at [email protected].