Hood Louver Kit - Miata MX5 (ND)

https://www.verus-engineering.com/web/image/product.template/338/image_1920?unique=b61af53

179.95 179.95000000000002 USD 179.95

179.95

Not Available For Sale

  • Finish

This combination does not exist.

OVERVIEW

The Verus Engineering Hood Louver Kit helps reduce engine bay heat and pressure. By improving the flow out of the engine bay, the louvers improve airflow through the radiator and condenser, achieving better cooling stack efficiency.  By reducing the pressure buildup in the engine bay, the louvers reduce front end lift, creating a slight bump in front end downforce.

During the design process; we utilized scan data as well as CFD to place louvers that flowed well with the hood's contours and placed the units in a low-pressure location on the hood; improving their effectiveness.

This hood louver kit is for the ND Miata owner looking for a purposely placed, built, and tested louver kit that weighs less than most carbon hoods.

WHAT IS INCLUDED

  • Louver, Right-Hand
  • Louver, Left-Hand
  • Wicker, Right-Hand
  • Wicker, Left-Hand
  • Cut Template (2)
  • Small Verus Vinyl Sticker
  • Hardware Kit, Includes All Hardware for Install
PART NUMBER

A0080A-BLK

A0080A-RAW

INSTALL AND DATA


INSTALL MANUAL


Features:

 

Reduce Underhood Pressure and Temperature

Cut-Out Template Included

Clinch Studs/Nuts Allow Vents to be Easily Removed for Cleaning

Offered in Gloss Black Powdercoat or Raw Aluminum

Wickers Included in Each Kit


Features:

 

Reduce Underhood Pressure and Temperature

Cut-Out Template Included

Clinch Studs/Nuts Allow Vents to be Easily Removed for Cleaning

Offered in Gloss Black Powdercoat or Raw Aluminum

Wickers Included in Each Kit

Specifications:


CFD Optimized Design

0.063 Thick 6061 Aluminum

CNC Laser Cut

Available Black Powdercoat for Durability

Stainless Steel Flush Clinch Studs

Stainless Serrated Nuts

Made in the U.S.A.


Specifications:


CFD Optimized Design

0.063 Thick 6061 Aluminum

CNC Laser Cut

Available Black Powdercoat for Durability

Stainless Steel Flush Clinch Studs

Stainless Serrated Nuts

Made in the U.S.A.

Science:


Utilizing CFD, we were able to place the louver in a low-pressure location on the hood, increasing the effectiveness of the louvers. Using scan data during the design phase, we were able to create a louver that follows OEM body lines.  Both of these situations improve the aesthetics and performance of the louvers.

Our hood louvers greatly decrease the underhood temperatures by evacuating the hot air in the engine bay and pulling in cooler air from the radiator/grill area.  This improves cooling stack efficiency by increasing the pressure delta between pre and post cooling stack.  Another benefit of the louvers is a reduction in front end lift by reducing the underhood pressure.  This is also known as downforce!


Science:


Utilizing CFD, we were able to place the louver in a low-pressure location on the hood, increasing the effectiveness of the louvers. Using scan data during the design phase, we were able to create a louver that follows OEM body lines.  Both of these situations improve the aesthetics and performance of the louvers.

Our hood louvers greatly decrease the underhood temperatures by evacuating the hot air in the engine bay and pulling in cooler air from the radiator/grill area.  This improves cooling stack efficiency by increasing the pressure delta between pre and post cooling stack.  Another benefit of the louvers is a reduction in front end lift by reducing the underhood pressure.  This is also known as downforce!