Full Brake Cooling Kit - Toyota GR Corolla

https://www.verus-engineering.com/web/image/product.template/4199/image_1920?unique=ff170bc

544.95 544.95 USD 544.95 ​ 

519.95 ​ 

Not Available For Sale

  • Replacement OEM Axle Nut (Pair)

This combination does not exist.

OVERVIEW

The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using a 3D printed carbon nylon inlet the bolts onto the factory bumper for fresh, high-pressure air and a stainless backing plate with a carbon duct, ducting air to the center of the rotor, this is the brake cooling kit to have. The kit comes with everything necessary for an install, including pre-cut hoses.

During the design process; we utilized in-house scan data to design the components. This resulted in a product that features a near OEM fit and finish.

The Verus brake cooling kit was designed for owners looking to maximize their brake's cooling efficiency and increase their brake's ability to do their job.

Note: We highly suggest replacing the axel nuts during the installation of this kit. Select [Yes] above the "Add to Cart" button to add a set of OEM axle nuts to your order.

WHAT IS INCLUDED

  • Backing Plate Including Carbon Ducts Riveted On (2, LH and RH)
  • 2.5" Pre-Cut Silicone High Temp Brake Hose (2)
  • 2.5" Stainless Hose Clamp (4)
  • 3D Printed Carbon Nylon Inlet Duct (2)
  • Hardware Kit, Includes All Necessary Pieces to Install Kit Seamlessly
PART NUMBER

A0525A-AXL

A0525A

INSTALL AND DATA


INSTALL MANUAL


INSTALL VIDEO

Features:

 

-  Direct Air into the Center of the Rotor

- Stainless Backing Plate Adds Even More Airflow into Center of the Rotor

- OEM Type Install

- Installs in a Few Hours With Minimal Hand Tools and Know-How

- Short Routing to Maximize Cooling Efficiency

- Pulls Air from High-Pressure Zone in Front Bumper


Features:

 

-  Direct Air into the Center of the Rotor

- Stainless Backing Plate Adds Even More Airflow into Center of the Rotor

- OEM Type Install

- Installs in a Few Hours With Minimal Hand Tools and Know-How

- Short Routing to Maximize Cooling Efficiency

- Pulls Air from High-Pressure Zone in Front Bumper



Specifications:

 

-Stainless Backing Plate

- Dry Carbon Air Duct

- 3D Printed Carbon Nylon Inlet Duct

- Pre-cut Brake Duct Hose

- All Necessary Hardware Included

- Made in the U.S.A.


Specifications:

 

-Stainless Backing Plate

- Dry Carbon Air Duct

- 3D Printed Carbon Nylon Inlet Duct

- Pre-cut Brake Duct Hose

- All Necessary Hardware Included

- Made in the U.S.A.