Dive Plane (Canard) Kit - Subaru WRX/STI (GR/GV)

    219.95 199.95 199.95000000000002 USD


    This combination does not exist.

    Add to Cart

    Terms and Conditions


    The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. The dive planes are able to be installed with 3M VHB tape or bolts and nuts.  Paper templates are included to ensure proper install location is achieved for maximum benefits.

    Utilizing state-of-the-art analysis software during the R&D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes. We designed these units using scan data obtained internally; ensuring an OE like fit and finish on the units.

    The dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.


    • Dive Plane, Right-Hand

    • Dive Plane, Left-Hand

    • 3M VHB Double-Sided Tape, Cut to Dive Plane Shape (2)

    • Install Template (2)

    • Hardware Kit, Includes All Hardware Necessary for Install



    Reduce Lift (Increase Downforce)

    Shift Aero Balance Forward

    Allows for Fine Tuning of Aero Balancing (Forward Biased)

    Help Seal Sides of Car

    Evacuate Air From the Front Wheel Well



     CFD Optimized Design

    Pre-Preg, Autoclave Cured, Carbon Fiber Composition

    Stainless Hardware Used Throughout 




    Dive planes, when designed properly, can increase front end grip and corner speed through improving front end downforce and reducing lift in other areas of the vehicle. We utilized OpenFOAM CFD software to improve the performance of our dive plane kit.

    The dive planes are part of the Ventus 1 and 2 packages for the GR / GV WRX/STI. The Verus Engineering Ventus 1 package adds a slight bump in downforce over the factory with minimal drag impact; while the Ventus 2 kit kicks that up a notch and dramatically increases downforce with a bit of added drag. We developed the Ventus 2 kit to provide a safe aerodynamic balance at speed to ensure safety and improved handling at high rates of speed. The Verus Engineering Ventus 2 package helps the GR/GV WRX get more from the tires at the track as well as improved confidence on the street. The Ventus 2 package is more geared towards a track car, but can still be utilized on a daily.




    Install Manual

    Informative Packet

    Recently Viewed Products