Rear Wing Kit - Porsche 981 GT4

    6,484.50 5,895.00 5895.0 USD

    6,484.50

    This combination does not exist.

    Add to Cart


    Terms and Conditions
    FREE SHIPPING ON ALL DOMESTIC ORDERS OVER $250!

    OVERVIEW

    Dramatically improve rear-end grip at speed with our 300mm chord, swan neck wing.  The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance around the track.

    The wing alone has the ability to dramatically reduce lap times. Through back-to-back testing, we saw a reduction of 2.5 seconds at Thunderhill and 3.3 seconds at Laguna Seca on a relatively stock GT4 at only 4 degrees angle of attack with one of our customers. The Verus GT4 swan neck wing installs like the OEM wing; with no permanent modifications to the car necessary.

    Construction on the rear wing is the same as seen in high-end Motorsports; which is how the wing only weighs a mere 8 lbs.

    The uprights are CNC machined from 6061-T6 aluminum and were FEA analyzed to ensure strength was kept high while weight was minimized.

    WHAT IS INCLUDED

    • Carbon Rear Wing, 300mm Swan Neck

    • Carbon Vented Endplate (2)

    • Billet Swan Neck Mount (2)

    • Billet Swan Neck Upright (2)

    • Billet Trunk Beauty Plate (2)

    • Gurney Flap

    • 3M VHB Double-Sided Tape, Gurney Flap

    • Trunk Strut

    • Double-Sided Tape, Beauty Plate (2)

    • Double-Sided Tape, Upright Bolt Cover (2)

    • Hardware Kit, Includes All Hardware Necessary for Install

     

     

    FEATURES

    Rear Wing

    2x2 Twill, 3k, Pre-Preg Carbon Fiber

    Carbon Inner Rib for Strength

    Carbon Endplates

    Wing Itself Weighs in at Under 9 lbs


    Mounting

    Machined 6061-T6 Aluminum Mounts and Uprights

    Military Spec (NAS) Hardware On Wing

    Bolts on like OEM

    Double-Sided Tape Included for Beauty Plates and OE Components

     

     

    SPECIFICATIONS

    CFD Optimized Airfoil

    Highly Efficient (Great L/D)

    15 Total Adjustment Angles (-1 to 14 degrees)

    Lightweight and High Strength

    Capable of Generating and Handling Over 700lbs of Downforce at 120MPH

    Swan Neck Design for Improved Efficiency from the Wing Element

    OEM Bolt-On Install

     

     

    SCIENCE

    The Verus Engineering 300mm Rear Wing kit was specifically designed for the Porsche enthusiast who wants more rear-end downforce for track days. The airfoil profile was run through ANSYS Adjoint solver to improve its efficiency. Through this iterative improvement process, we were able to improve the wing profile's performance. The wing was specifically placed to improve performance and create a good aero balance with the rest of the Verus Engineering Ventus 2 kit. The Ventus 2 kit produces a significant increase in downforce generated vs. the factory car and will reduce lap times substantially.

    Our CFD data and our real-world experimental data matched well with the rear wing. The wing hit all the major goals we set forth to achieve first in our CFD simulations and then with our real-world testing. The strong correlation between CFD data and real-world testing validates both our CFD analysis approach and the wing’s performance.

     

     

    INSTALL AND DATA

     

    Install Manual



    Performance Data

     

    Recently Viewed Products