Skip to Content

Dive Plane Kit - Mk6 VW Golf

159.97 159.97

Racer Special

Everything we make is special — sometimes we just make too many, and sometimes a piece leaves the shop with finishing tolerances just outside our usual high standards. Racer Special products are a perfect way to upgrade your ride and save at the same time. Because each one is unique, the cosmetic blemishes differ from unit to unit, and all Racer Special items are sold as final sale and are not covered by our warranty. Every one still carries the same design excellence and on-track performance Verus Engineering is known for. Check out this video to see exactly what you can expect from Racer Special goods.

OVERVIEW

Our Dive Planes for the Mk6 Golf were specifically designed to add a slight bump in front-end downforce while being drag neutral and is safe to be used with or without our Mk6 Golf rear diffuser.

Dive planes also referred to as canards, allow you to shift the aero balance forward, aiding you and your setup in balancing out a large rear wing or diffuser. 

Dive planes also help seal the sides of the car and help evacuate air from the wheel well, further reducing lift and drag in some cases.  

These units are constructed from pre-preg, autoclaved cured, 2x2 twill carbon, that is polished to a high gloss shine.

WHAT IS INCLUDED

  • Dive Plane, Left-Hand

  • Dive Plane, Right-Hand

  • 3M VHB Doubled-Sided Tape, Cut to Shape (2)

  • Template (2)

  • Hardware Kit, Includes All Necessary Hardware for Install

PART NUMBER

A0147A

INSTALL AND DATA


INSTALL MANUAL


Features:


  • Reduce Lift (Increase Downforce)
  • Shift Aero Balance Forward
  • Allows for Fine Tuning of Aero Balancing (Forward-biased)
  • Helps Seal Sides of Car
  • Evacuate Air From the Front of the Wheel Well

Features:


  • Reduce Lift (Increase Downforce)
  • Shift Aero Balance Forward
  • Allows for Fine Tuning of Aero Balancing (Forward-biased)
  • Helps Seal Sides of Car
  • Evacuate Air From the Front of the Wheel Well

Specifications:


  • CFD Optimized Design
  • Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition
  • 3M Double-Sided Tape or Bolt-On Install
  • Stainless Hardware Used Throughout
  • Install Template Included

Specifications:


  • CFD Optimized Design
  • Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition
  • 3M Double-Sided Tape or Bolt-On Install
  • Stainless Hardware Used Throughout
  • Install Template Included