Rear Wing Kit, Includes Carbon Spoiler - 987 Porsche Cayman
OVERVIEW
Dramatically improve rear-end grip at speed with our 300mm chord, swan neck wing with carbon spoiler for the 987 Porsche.
The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance around the track. The wing alone has the ability to dramatically reduce lap times.
Construction on the rear wing is the same of that in Motorsport; as it is built by a Motorsport wing provider in the U.S.A.
The uprights are CNC machined from 6061-T6 aluminum and were FEA analyzed to ensure strength was kept high while weight was minimized. The carbon spoiler installs onto the OE trunk with a multitude of bolts and transfers load through multiple points to the chassis.
WHAT IS INCLUDED
Carbon Rear Wing, 300mm Chord Swan Neck
Carbon Vented Endplate (2)
Billet Swan Neck Mount (2)
Billet Swan Neck Upright (2)
Carbon Ducktail Spoiler
Gurney Flap
3M VHB Double-Sided Tape, Gurney Flap
Drill Template
Hardware Kit, Includes All Necessary Hardware for Install
FEATURES
CFD Optimized Airfoil
Highly Efficient (Great L/D)
15 Total Adjustment Angles (-1 to 14 degrees)
Lightweight and High Strength
Capable of Generating and Handling Over 700lbs of Downforce at 120MPH
Swan Neck Design for Improved Efficiency from the Wing Element
SPECIFICATIONS
Rear Wing
2x2 Twill, 3k, Pre-Preg Carbon Fiber
Cured in an AutoClave
Carbon Inner Rib for Strength
Carbon Endplates
300mm Chord w/ 1581mm Length (PCA Spec)
Duck Tail
2x2 Twill, 3k, Pre-Preg Carbon Fiber
Cured in an AutoClave
Aluminum Mounts Bonded In
Double-Sided Tape and Foam Pre-Applied
Mounting
Machined 6061-T6 Aluminum Mounts and Uprights
Military Spec (NAS) Hardware On Wing
Stainless Hardware Throughout
SCIENCE
The Verus Engineering 300mm Rear Wing kit was specifically designed for the Porsche enthusiast who wants more rear-end downforce for track days. The airfoil profile was run through ANSYS Adjoint solver to improve its efficiency. Through this iterative improvement process, we were able to improve the wing profile's performance. The wing was specifically placed to improve performance and create a good aero balance with the rest of the Verus Engineering Ventus 2 kit. The Ventus 2 kit produces a significant increase in downforce generated vs. the factory car and will reduce lap times substantially.
Our CFD data and our real-world experimental data matched well with the rear wing. The wing hit all the major goals we set forth to achieve first in our CFD simulations and then with our real-world testing. The strong correlation between CFD data and real-world testing validates both our CFD analysis approach and the wing’s performance.