High Downforce Front Splitter Kit - Mk5 Toyota Supra

https://www.verus-engineering.com/web/image/product.template/3652/image_1920?unique=4978c17

2,149.95 2149.95 USD 2,149.95

2,149.95

Not Available For Sale

    This combination does not exist.

    OVERVIEW

    We were asked for a splitter that makes more downforce to allow higher angles of attack on rear wings and lower lap times, thus we developed this upgraded splitter blade. This tunneled front splitter bolts onto the car in the same fashion as our previous splitter, and makes 27% more front downforce. 

    The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.

    The splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either.  The material is also lightweight and stiff; which makes it a great splitter material.

    The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further.  The air dam is produced from sheet aluminum and then powder coated black for durability.

    WHAT IS INCLUDED

    • (2) Carbon Polyweave Splitter Blade
    • (2) Sheet Aluminum Air Dam
    • (2) Carbonfiber Splitter Diffuser
    • (1) Chassis Mount Bracket Kit (10 pieces total, steel and aluminum)
    • (1) Rubber Splitter Edge Seal
    • (2) Cut Template
    • Rubber Splitter Edge Seal
    • Hardware Kit Including All Necessary Bolts/Nuts/Washers
    PART NUMBER

    A0420A

    INSTALL AND DATA


    INFORMATIVE PACKET


    INFORMATIVE PHOTO


    INSTALL MANUAL


    INSTALL VIDEO


     

     

    FEATURES

     Greatly Increases Front End Downforce

    Produces High Downforce for Large Rear Wings

    Capable of Handling 300+ Lbs

    Constructed From Carbon Polyweave, Which Offers Strength, Low Weight, Durability, and a Great Appearance

    Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1

    Integrated Air Dam that Follows The Front Bumper Lines Well

     

    SPECIFICATIONS

    Front Splitter is Manufactured From Carbon Polyweave, Offering Superior

    Strength, Weight, Durability, and Appearance to Many Other Options

    Will Not Grab and Bend Surfaces Like Aluminum Units

    Will Not Crack and Break Like Carbon and ABS Units

    Abrasive Resistant While Stiff

    5052 Aluminum Air Dam

    2x2 Twill Carbon Splitter Diffuser

    CNC Cut and Bent Brackets

    Stainless Hardware Throughout

     

     

    SCIENCE

    Front splitters, when designed properly, greatly increase front-end grip. Utilizing state-of-the-art analysis software, we were able to extract more performance from the front splitter, splitter diffuser tunnels, and air dam combo through an iterative design process. We were also able to properly size the front splitter and dive planes to counteract the rear wing and diffuser; creating a safe and effective aero balance for owners. This is important as an unbalanced car is more difficult to drive at the limit.

    With this specific splitter, you will need to run your rear wing at a higher AOA than our original splitter.